DESCRIPTION
Champion Power Equipment 12000 Watt Tri-Fuel Generator Portable with Electric Start & CO Shield
The Champion Power Equipment 201161 MKE 12000 Tri-Fuel Portable Generator with CO Shield is designed with your safety and convenience in mind. For projects, the massive 717cc Milwaukee Series V-Twin Engine has what it takes to handle the multiple power tools and large equipment you need to get the job done. When you are not running your generator on natural gas, you also have the option of operating it on gasoline or propane. The Fuel Select dial allows you to safely select gasoline, propane (LPG), or natural gas (NG) as your fuel source. Using natural gas, the generator produces 12,500 starting watts and 10,000 running watts. Using gasoline, the generator produces 15,000 starting watts and 12,000 running watts, and will run for 9 hours at 50% load when the 11-gallon fuel tank is full. When using a 20-pound propane tank, it produces 13,750 starting watts and 11,000 running watts, and will run for 3.5 hours at 50% load. A 6-foot propane hose with a built-in regulator is included. The Lift Hook, foldaway U-shaped handle and never flat tires make it easy to move your power where you need it. All the outlets have covers for protection and include a 120/240V 50A outlet (14-50R), a 120/240V 30A (L14-30R) and 120V 30A (L5-30R) locking outlets, and two 120V 20A GFCI-protected household duplex outlets (5-20R). This generator is EPA certified. CO Shield® technology monitors the accumulation of carbon monoxide (CO), a poisonous gas produced by engine exhaust when the generator is running. If CO Shield® detects unsafe elevated levels of CO gas, it automatically shuts off the engine. CO Shield® is not a substitute for an indoor carbon monoxide alarm or for safe operation. DO NOT allow engine exhaust fumes to enter a confined area through windows, doors, vents or other openings. Generators must ALWAYS be used outdoors, far away from occupied buildings with engine exhaust pointed away from people and buildings. Meets the requirements of ANSI/PGMA G300-2018.